Ideal for people sitting for long periods, this multi-purpose foam seating wedge helps maintain the natural curve of the spine and alleviates nerve pressure in the lower to mid back area.

The angle of this cushion is nine degrees, which is anatomically desirable to encourage correct pelvic tilt to reduce pressure on lumbar discs so minimising potential back problems. While this cushion is normally used with the lower end in front, when used in the car it can be turned the other way to prevent you from sliding downward or lower back strain.

Features:
Multi-purpose seating wedge
Alleviates nerve pressure
Aid to maintain the natural curve of the spine
9° angle for correct pelvic tilt
Can be turned around to prevent a downward slide, creating lower back strain
Maximum user weight: 100 kg

Specifications:
Height: 6-10cm
Length: 40cm
Width: 43cm

Compliance:
ARTG Number: 176835
Warranty: 1 year

Ideal for post natal or post operative discomfort, haemorrhoids, hip bursitis, coccyx or prostate inflammation or other painful conditions, this ring cushion is designed to help relieve pain in the tailbone and coccyx area by offering a soft support to the buttocks, with no direct pressure to the bony coccyx.

The unique is shaped like a doughnut shape design of the ring cushion means that vulnerable tailbone and coccyx region is effectively suspended in the central cavity. This helps reduce the risk of a pressure injury to this vulnerable area when you are sitting still for long periods of time. This cushion is made from a single piece of puncture-proof convoluted foam rubber, meaning that is has no joins or seams for discomfort.

Includes a lightweight stretch cover for added comfort, hygiene and ease of cleaning. The cover is easy to remove and can be machine washed.

Features:
height of the cushion is 80 mm.
doughnut shaped cushion
relieves pain in the tailbone and coccyx
lightweight stretch cover
made from puncture proof latex rubber
machine washable cover
two sizes available
maximum user capacity 110 kg

Compliance:
ARTG Number: 176835
Warranty: 1 year

This foam pressure care cushion is suited to people at low to medium risk of pressure injury that is, damage to the skin and underlying tissue as a result of prolonged sitting without moving.

This combination of foam and gel cushion is made from a gel bladder encased inside a resilient foam cushion. This design helps the cushion to evenly disperse the weight of a seated person over a larger area, which minimises pressure points on the buttocks or thighs. The water-based gel not only helps reduce direct pressure on the skin that might lead to pressure injury but also provides a cooling effect to reduce heat and perspiration build up. The high-density foam provides stability plus great comfort for prolonged sitting.

The outer cover is low shear to prevent damage to the skin as a result of friction the damage that can be caused to delicate skin when it is dragged across another surface. It also has a non-slip base to help stop the cushion from sliding off the chair. Two positioning handles at either side of the cushion make it easy for the user to reposition the cushion.

Features:
combination gel and foam cushion
good for low to medium-pressure risk
weight is evenly dispersed
low-shear outer cover
non-slip base
maximum user weight 150 kg
range of available sizes

Compliance:
ARTG Number: 176835
Warranty: 1 Year

The Etac Star Incontinence Cover is suitable for use with the Starlock air cell cushion. Made from a smooth, 4-way stretch, breathable material; covered with a polyurethane film and a concealed zipper.

*Available in various sizing options.

Features:
For use with the Starlock Air Cell Cushion
Non-slip material on the base of the cover to prevent movement
Treated with antimicrobial to inhibit odour, bacteria, mould and mildew
Flame resistant
Hand wash with soap, baking soda or vinegar or Machine wash in warm water. Maximum cleaning temperature: 40 °C. Do not bleach. Rinse in cold water and machine dry at low temperature or line dry

Compliance:
ARTG Number: 339953
Australian Standards: EN 12182:2012
Warranty: 1 Year

The StabilAir is the perfect blend of a multi-celled air cushion featuring soft, contoured foam tubes within each air cell. Designed with two sizes of foam cylinders for increased stability.

The height variation of internal foam provides two benefits:

First, the internal foam is contoured, with taller foam around the outside, and shorter foam for the leg troughs, buttocks, and coccyx. This contoured layer of foam provides stability, making it easier to undertake transfers on and off the cushion.

The second benefit is that the foam provides a backup or secondary layer of skin protection, which prevents the cushion from fully bottoming out. This means that a user and care provider can have the "peace of mind" of knowing that should the multi-celled air cushion lose air, the user is safeguarded with a backup layer of skin protection.

The air cell cushion's formability ensures good pressure redistribution with a single inflation chamber, which is easy to adjust with a valve.

*AVAILABLE IN THESE CELL HEIGHTS: 7.5cm & 10cm

Features:
Hybrid air cushion
Soft foam and air cylinders for immersion and envelopment
Foam height variation for anatomical shape
Single valve inflation
Made with a high-quality, flame-resistant, latex-free neoprene rubber
Internal foam is 1.8 density fire retardant PU, contoured depending on cushion height
Incontinence covers available
Included with the cushion: fitted cover and hand pump
Cushion: Handwash with soap, baking soda or vinegar. To disinfect the cushion, use a 70% alcohol-based disinfectant solution. Machine wash for 10min. Maximum cleaning temperature: 40 °C
Cover: Machine wash in warm water. Maximum cleaning temperature: 60 °C. Do not bleach. Rinse in cold water and line dry or machine dry at a low temperature
Maximum user weight: none
Warranty Cushion: 2 years
Warranty Cover: 1 year

Compliance:
ARTG Number: 339953
Australian Standards: EN 12182:2012
Warranty: 2 Years

The Etac StarLock Air Cushion combines outstanding pressure redistribution qualities, high-level stability, and unlimited positioning possibilities. These features can be challenging in air cell cushions; however, the StarLock features patented technology to lock the airflow between cells to suit the individual, thereby retaining positioning and stability. The air cells adapt to the body structure, minimising tissue deformation. The StarLock Air Cushion can also be used as a one-compartment cushion.

With its unique positioning possibilities and stability, the StarLock cushions provide the highest level of therapeutic prevention and treatment of pressure injuries. The envelopment ability of the air cell is related to the height of the cell. The higher the cell, the greater the envelopment.

*AVAILABLE IN THESE CELL HEIGHTS: 5cm, 7.5cm, 10cm &13cm

Features:
Highest level of therapeutic prevention and treatment
Outstanding pressure redistribution
Close to unlimited positioning possibilities
Airflow lock between cells for positioning and stability
User can sink into cushion for ultimate immersion and envelopment
Incontinence covers available
Included with the cushion: fitted cover and hand pump
Cushion: Handwash with soap, baking soda or vinegar. To disinfect the cushion, use a 70% alcohol-based disinfectant solution. Machine wash for 10min. Maximum cleaning temperature: 40 °C
Cover: Machine wash in warm water. Maximum cleaning temperature: 60 °C. Do not bleach. Rinse in cold water and line dry or machine dry at a low temperature
Maximum user weight: none
Warranty Cushion: 2 years
Warranty Cover: 1 year

Compliance:
ARTG Number: 339953
Australian Standards: EN 12182:2012
Warranty: 2 Years

The Star Standard Air cell cushion is an effective single compartment air cell cushion that provides optimal pressure redistribution and immersion, perfect for the prevention and care of pressure injuries. The cushion is fabricated with flexible neoprene to allow the cells to form shape and immerse around the buttocks. This immersion ensures cell deformation remains at a low level.

The Star Standard Air cushion is available in two height ranges. The higher the cells, the better the pressure redistribution qualities. The Star Standard Air cushion has a single inflation compartment that is easy to adjust with a single valve. The Star Standard Air cushion is an ideal combination of easy handling and dynamic stability, which may improve sitting tolerance over time.

*AVAILABLE IN THESE CELL HEIGHTS: 5cm & 10cm

Features:
One compartment with dynamic stability
High levels of immersion and envelopment
Outstanding pressure redistribution
Single valve inflation
Incontinence covers available
Included with the cushion: fitted cover and hand pump
Cushion: Handwash with soap, baking soda or vinegar. To disinfect the cushion, use a 70% alcohol-based disinfectant solution. Machine wash for 10min. Maximum cleaning temperature: 40 °C
Cover: Machine wash in warm water. Maximum cleaning temperature: 60 °C. Do not bleach. Rinse in cold water and line dry or machine dry at a low temperature
Maximum user weight: none
Warranty Cushion: 2 years
Warranty Cover: 1 year

Compliance:
ARTG Number: 339953
Australian Standards: EN 12182:2012
Warranty: 2 Years