Sort by:
84 products
84 products
BetterLiving® alternating pressure surfaces are a cost-effective solution for the prevention and management of pressure-related injuries.
Ideally suited to home care or aged care environments, these products can be used for people at risk to high risk of pressure injury.
Safety
No more concerns over correct pressure level settings with our AutoCair feature - automatic weight sensing technology that delivers fail-safe patient comfort levels.
Simplicity
Designed for basic ease of use and minimal maintenance. Easy to set up, simple to operate and straightforward to clean and maintain.
Quality
Conforms to all relevant Australian standards. Made using the best quality materials, every product must pass our stringent Quality Control inspection and regular testing protocols.
Harnessing the latest technical features for improved clinical care and ease of use, BetterLiving® offers both a mattress replacement and a mattress overlay option.
Features:
Essential features for pressure injury prevention and treatment
Automatic pressure setting
Replace existing mattress for superior therapy
Cell in cell for enhanced user safety and comfort
Constantly inflated base layer protects from bottoming out
Quick twist CPR for rapid deflation
Easy to set up, operate and maintain
SWL: 40-180kg
Dimensions: 2000 x 880 x 200 mm
Compliance:
ARTG Number: 289458
Australian Standards: IEC 60601-1, IEC60601-1-2, IEC60601-1-11, BS7175 Crib 5
Warranty: 2 Year
The ProCair Prime can be used as a fully alternating pressure mattress and can also be easily converted to a hybrid foam mattress
Easy to set up, the ProCair Prime automatically adjusts the pressure to suit the weight of the patient and does not need a separate pump unit to hang from the bed - it is all built-in! This minimises trip hazards or damage from pumps being bumped off the bed.
AutoCair
No more concerns over correct pressure level settings with our AutoCair. This cyclic automatic weight sensing technology delivers fail-safe patient comfort levels.
EasyCair
This all-in-one system has a combined mattress and pump with easy setup and does not require a bed end to hang a separate pump. The pump is also protected from potential damage from accidentally being bumped off a bed end. The all-in-one system can be easily and quickly moved between beds.
DuoCair
The mattress can easily be converted to a hybrid mattress by adjusting the position of a built-in foam layer. Hybrid mode provides even greater comfort for the patient. It easily and quickly converts back into dynamic mode to step-up to complete pressure off-loading if required.
The ProCair Prime is an all-in-one alternating pressure mattress with an integrated pump and is adaptable for different clinical needs.
Dimensions:
Single (2000 x 900 x 180mm)
King Single (2000 x 1050 x 180mm)
Compliance:
ARTG Number: 289458
Australian Standards: IEC 60601-1, IEC60601-1-2, IEC60601-1-11, BS7175 Crib 5
Warranty: 3 Year
SWL (kg) 30-200kg
The Cobalt M11 Pressure Care foam mattress is a 3-layer mattress that features a high-density diamond cut, castellated upper surface. For those who desire a firm mattress that provides solid support coupled with low-med risk pressure care, the M11 Pressure Care foam mattress is for you.
The castellated design of the top layer provides excellent pressure redistribution and increased ventilation through air channels to create a perfect micro-climate for pressure care. Firm side walls on either side of the mattress provide assistance to users when getting in and out of bed.
The M11 Pressure Care foam mattress also boasts an ultra-soft heel section with visco-elastic foam to help in the prevention of pressure injuries around the heel and ankle area, and comes with a durable fluid resistant stretch cover with convenient carry handles on one side.
The Cobalt M11 Pressure Care mattress is available in Single and King Single bed sizes and is ideal for patients who are rated at low-medium risk of developing pressure ulcers. It is suitable for use in the community and in nursing homes.
Features
-Pressure Injury Risk Rating - Low-Med
-Available in Single (88x198x15cm) and King Single (105x198x15cm) bed sizes
-SWL 200kg - Recommended user weight range 30-180kg
-Fluid resistant, multi-directional stretch, vapour permeable cover
-Waterfall flap cover – Reduces the risk of fluid ingress.
-Fire retardant cover and foam
-Castellated foam surface – Ensures excellent pressure re-distribution and temperature control.
-Firm side walls to help with getting into and out of bed, and patient transfers
-Warranty 3 Years
The Cobalt M11 Pressure Care foam mattress is a 3-layer mattress that features a high-density diamond cut, castellated upper surface. For those who desire a firm mattress that provides solid support coupled with low-med risk pressure care, the M11 Pressure Care foam mattress is for you.
The castellated design of the top layer provides excellent pressure redistribution and increased ventilation through air channels to create a perfect micro-climate for pressure care. Firm side walls on either side of the mattress provide assistance to users when getting in and out of bed.
The M11 Pressure Care foam mattress also boasts an ultra-soft heel section with visco-elastic foam to help in the prevention of pressure injuries around the heel and ankle area, and comes with a durable fluid resistant stretch cover with convenient carry handles on one side.
The Cobalt M11 Pressure Care mattress is available in Single and King Single bed sizes and is ideal for patients who are rated at low-medium risk of developing pressure ulcers. It is suitable for use in the community and in nursing homes.
Features
-Pressure Injury Risk Rating - Low-Med
-Available in Single (88x198x15cm) and King Single (105x198x15cm) bed sizes
-SWL 200kg - Recommended user weight range 30-180kg
-Fluid resistant, multi-directional stretch, vapour permeable cover
-Waterfall flap cover – Reduces the risk of fluid ingress.
-Fire retardant cover and foam
-Castellated foam surface – Ensures excellent pressure re-distribution and temperature control.
-Firm side walls to help with getting into and out of bed, and patient transfers
-Warranty 3 Years
Features:
Three layer mattress with top memory foam layer, and two support layers for the ultimate in comfort and support
Replaceable four-way stretch polyurethane cover
Fire retardant cover and foam
Water resistant cover
Concealed zip on underside of mattress
Liquid protected zip
Cover removable for cleaning and replacement
Available in Single and King Single sizes
SWL 250kgs (patient weight up to 15kgs)
Dimensions:
Single Size: 1980 x 880 x 150mm
King Single: 1980 x 1070 x 150mm
Features:
Three layer mattress with top memory foam layer, and two support layers for the ultimate in comfort and support
Replaceable four-way stretch polyurethane cover
Fire retardant cover and foam
Water resistant cover
Concealed zip on underside of mattress
Liquid protected zip
Cover removable for cleaning and replacement
Available in Single and King Single sizes
SWL 250kgs (patient weight up to 15kgs)
Dimensions:
Single Size: 1980 x 880 x 150mm
King Single: 1980 x 1070 x 150mm
The AirTec 7.5 Alternating Pressure Mattress is an advanced full replacement alternating mattress, featuring 5″ alternating cells and a 2.5″ foam base. It is suitable for users who are at medium to high risk of developing pressure sores and injuries. Total height of the mattress is only 190mm, an added benefit when using a floorline bed as the risk of acquiring injury from falls is much lower.
Features:
Full mattress replacement system with 5″ alternating cells and a 2.5″ foam underlay
Advanced, whisper-quiet digital pump operation – one of the quietest available on the market
Easy to set up and use, only patient weight required
Static or alternating modes, adjustable cycle times in alternating mode
Offers a seat inflate mode in either static or alternating – increases pressure in cells in sacrum area for greater support when sitting upright in bed
Water resistant yet vapour permeable and breathable stretch TPU cover – has a high Moisture Vapour Transfer Rate and decreases shear
Fire retardant cover
Emergency CPU rapid deflate pull tag
Safe working load: 160kg
Available in single & king single
Dimensions:
Single: 1980 x 880 x 190mm
King Single: 1980 x 1050 x 190mm
The AirTec 7.5 Alternating Pressure Mattress is an advanced full replacement alternating mattress, featuring 5″ alternating cells and a 2.5″ foam base. It is suitable for users who are at medium to high risk of developing pressure sores and injuries. Total height of the mattress is only 190mm, an added benefit when using a floorline bed as the risk of acquiring injury from falls is much lower.
Features:
Full mattress replacement system with 5″ alternating cells and a 2.5″ foam underlay
Advanced, whisper-quiet digital pump operation – one of the quietest available on the market
Easy to set up and use, only patient weight required
Static or alternating modes, adjustable cycle times in alternating mode
Offers a seat inflate mode in either static or alternating – increases pressure in cells in sacrum area for greater support when sitting upright in bed
Water resistant yet vapour permeable and breathable stretch TPU cover – has a high Moisture Vapour Transfer Rate and decreases shear
Fire retardant cover
Emergency CPU rapid deflate pull tag
Safe working load: 160kg
Available in single & king single
Dimensions:
Single: 1980 x 880 x 190mm
King Single: 1980 x 1050 x 190mm
The AirTec 5 Alternating Pressure Mattress Overlay is an advanced lightweight overlay to be used on top of a foam medical mattress. It is suitable for users who are considered “at risk” of developing pressure sores and injuries.
Features:
Alternating overlay designed to be used on top of an existing foam mattress
Advanced, whisper-quiet digital pump operation – one of the quietest available on the market
Easy to set up and use, only patient weight required
Static or alternating modes, adjustable cycle times in alternating mode
Offers a seat inflate mode in either static or alternating – increases pressure in cells in sacrum area for greater support when sitting upright in bed
Water resistant yet vapour permeable and breathable stretch TPU cover – has a high Moisture Vapour Transfer Rate and decreases shear
Fire retardant cover
Emergency CPU rapid deflate pull tag
Safe working load: 160kg
Available in Single & King Single
Dimensions:
Single: 1980 x 880 x 130mm
King Single: 1980 x 1050 x 130mm
The AirTec 5 Alternating Pressure Mattress Overlay is an advanced lightweight overlay to be used on top of a foam medical mattress. It is suitable for users who are considered “at risk” of developing pressure sores and injuries.
Features:
Alternating overlay designed to be used on top of an existing foam mattress
Advanced, whisper-quiet digital pump operation – one of the quietest available on the market
Easy to set up and use, only patient weight required
Static or alternating modes, adjustable cycle times in alternating mode
Offers a seat inflate mode in either static or alternating – increases pressure in cells in sacrum area for greater support when sitting upright in bed
Water resistant yet vapour permeable and breathable stretch TPU cover – has a high Moisture Vapour Transfer Rate and decreases shear
Fire retardant cover
Emergency CPU rapid deflate pull tag
Safe working load: 160kg
Available in Single & King Single
Dimensions:
Single: 1980 x 880 x 130mm
King Single: 1980 x 1050 x 130mm
Features:
Floorline bed – low height to top of mattress platform only 7.5cm
Low bed ends for excellent patient visibility
Attractive wooden bed ends with concealed actuators
4-way electronic adjustment
Electronic height adjustment, back rest, knee break, trendelenburg
Trendelenburg and reverse Trendelenburg functionality
Auto Contour function supports user position when adjusting
Auto-Stop at height of 250mm when lowering the bed to reduce crush risk
Emergency self-levelling function
Pull-apart bed for transportability
Transport bracket included
Available in Single & King Single
Specifications:
Safe Working Load: 200kg
Length (overall): 2275 mm
Width (overall): 1070 mm
Mattress platform dimensions: 2000 x 912 mm
Recommended mattress size: 1980 x 880 mm
Head/Footer width: 1070 mm
Mattress platform height: 75-660 mm
Back adjustment: 0-70°
Knee break adjustment: 0-35°
Trendelenburg angle max: 12°
Features:
Fully enclosed wooden bed ends
Single sized bed
May be fully disassembled for transport, and stored in a secure and compact position with transport stand
Handset with lockout function
Trendelenburg and reverse Trendelenburg functionality
4 section power adjustable bed
-Height power adjustable
-Back rest powered tilt adjustable
-Knee break powered adjustable
Recommended mattress size: 1980 x 880 mm
Available in Single & King Single
*Rails not included, full length collapsible steel rails, full length beech wooden rails, three-quarter metal rails are optional.
Specifications:
Safe Working Load: 213kg
Maximum User Weight: 178kg
Overall length: 2150 mm, 2350 mm with length extension
Overall width: 980 mm
Length – Mattress platform length: 1900 mm
Length with extension – Mattress platform: 2100 mm
Width – Mattress platform width: 870 mm
Recommended mattress size: 1980 x 880 mm
Head down tilt: 0-11°
Foot down tilt: 0-11°
Head/Footer width: 980 mm
Mattress platform height: 335 -725 mm
Underbed clearance to frame: 295 mm
Underbed clearance min: 145 mm
Back adjustment: 0-70°
Knee break adjustment: 0-23°
Leg rest adjustment: -27-0°
